Mapei, Life Deck, Xcel, Euclid Chemical, and Sika overlay and repair systems — in stock now at both Las Vegas locations. Patch spalls, resurface worn slabs, and build decorative overlays without replacing your concrete.
Same-day pickup available
Mon–Fri 6AM–4PM · Sat 7AM–8:30AM
Veteran-Owned · Las Vegas Local · Expert Guidance On Every Sale
Call Now →Every product in stock at both Las Vegas locations. Our team will help you choose the right mortar, leveler, or overlay system for your substrate, conditions, and finish.
Fast-Setting Repair Mortar
Natural gray rapid-setting mortar that blends with existing concrete. Variable water ratios allow flexible placement. Ready for floor coverings or overlays in as little as 90 minutes.
Self-Leveling Underlayment & Topping
Calcium aluminate-based, quick-setting, self-leveling topping engineered for the highest-compressive-strength underlayments with maximum resistance to wheel tracking and indentations.
Vertical & Overhead Repair Mortar
One-component, fiber-reinforced, shrinkage-compensated, high-early-strength repair mortar with a built-in corrosion inhibitor. Handles interior/exterior vertical and overhead concrete repairs including precast, tilt-up, post-tensioned, and cast-in-place.
Skim Coating & Patching Compound
High-performance polymer-modified, fiber-reinforced skim coating compound. Smooths minor surface variations for almost any floor application. Rapid-setting formula allows fast-track flooring installations in 30–60 minutes.
Thin Resurfacing & Texturing Compound
Just-add-water polymer modified cementitious compound for thin resurfacing and texturing. Used as a bond coat before Stamp-Top and as a base coat for Texture-Top, Trowel-Top, and Spray-Top systems.
Self-Leveling Underlayment & Repair
High-strength calcium-aluminate-based self-leveling underlayment designed to repair or refurbish interior concrete floors before installation of traditional floor coverings.
High-PSI Decorative Overlay Cements
Life Deck cements blended with silica sand and proprietary additives for high-PSI applications. LD-1 waterproofing base coats, LD-2 white smooth finishes, LD-3 grey knock-down texture, LD-5 grout lines & dark stains, LD-6 white 1/4″ stamping.
Two-Part Polymer Modified Patching
Two-part polymer modified cement patching material — Part A is Xcel Acrylic Additive, Part B is mortar base. Fills, repairs, and levels horizontal surfaces up to 1″ deep. Excellent waterproof performance for interior or exterior repairs.
Stamped Overlay System
Silica sand, proprietary additives, and cement formulated for stamped overlays on any interior/exterior concrete substrate. Mixed with Xcel SMP 5000 to exceed 5000 PSI compressive strength — will not shrink, check, crack, or break up.
Non-Shrink Cementitious Grout
One-component, non-shrinking, non-metallic cement-based grout with corrosion inhibitor and silica fume. Special blend of fine aggregate and plasticizers for exceptional placing and performance characteristics.
Accelerated-Cure Screed Mortar
Accelerated-cure screed mortar suitable for bonded and unbonded applications. Easily screeded or sloped, with the workability and working time of conventional screed mortars.
High-Strength Non-Metallic Grout
Designed for critical applications requiring high strength, non-staining characteristics, and positive expansion. Contains only natural aggregate and expansive cementitious binder. Extremely flowable — appears similar to concrete when cured.
Polishable Self-Leveling Topping
Polishable, self-leveling cementitious topping with a fine-aggregate exposed finish. Engineered for fast-track resurfacing of horizontal wear surfaces — deliver a refined polished concrete look over existing slabs.
Self-Leveling Floor Underlayment
Single-component, free-flowing, self-leveling compound for concrete floor underlayment. Applied featheredge to 1″ neat. Can serve as an indoor light-duty wearing surface when protected by an Euclid epoxy/urethane system.
Vertical & Overhead Repair Mortar
Single-component, quick-setting, low-shrinkage repair mortar with unique polymers and fiber reinforcement for trowel-applied vertical and overhead repairs requiring high performance.
Polishable Self-Leveling Resurfacer
Easy-to-use self-leveling resurfacing compound for new or worn concrete substrates. Excellent adhesion, toughness, and long-term durability. Grindable and polishable to high gloss within 24 hours. Can be extended with decorative aggregate — suitable for countertops and poured-in-place applications.
Polished Concrete Look Resurfacer
Self-leveling resurfacing compound with graded natural aggregate that can be ground and polished to achieve the appearance of polished concrete. High-early strength allows polishing within 24 hours.
Latex Bonding Agent
Liquid latex bonding agent for cement-based repair mortars and concrete. Long open time — repair materials can be placed while wet or after drying. A new generation of non-EVA latex using reactive chemistry for superior bonding performance.
Self-Leveling Joint Sealant
Self-leveling sealant for horizontal expansion joints in concrete and cementitious slabs. Flows and levels into joints for a clean, professional finish. Available in limestone color.
Multi-Purpose Elastic Sealant
Polyurethane sealant for all types of joints up to 1/2″ deep. Excellent for small joints, window frames, door frames, flashing, roofing, and canal/reservoir joints. Suitable for vertical and horizontal applications at 40°F.
Choosing the wrong mortar or overlay wastes time, money, and a perfectly good slab. Our team has 30+ years of hands-on experience recommending systems that actually work — especially in Las Vegas heat.
South Las Vegas
4125 Wagon Trail Ave, Las Vegas, NV 89118
North Las VegasNew!
4601 E Cheyenne Ave Ste 107, Las Vegas, NV 89115
Mon–Fri 6AM–4PM · Sat 7AM–8:30AM · Sun Closed
Explore More Products