Do you carry Makita tools in Las Vegas?
- Yes — we stock one of the largest Makita selections in Las Vegas across angle grinders, demolition hammers (27–70 lb), rotary hammers, HEPA vacuums, concrete vibrators, rebar cutters, reciprocating saws, impact wrenches, blowers, mixing drills, sanders, and polishers. Both 18V LXT and 40V/80V XGT platform tools are available. Call (702) 749-6318 to confirm current model availability.
What is the difference between Makita's demolition hammers — which size do I need?
- Makita's demolition hammers range from 10 lb (HM1211B, 10.5 ft-lbs) through 70 lb (HM1812X3, 53.9 ft-lbs). For tile removal and light concrete chipping, the HM1211B is sufficient. For breaking residential concrete slabs and footings, the HM1214C (27 lb, AVT®) or HM1307CB (35 lb, variable speed) are the right range. For heavy commercial slab demolition, the HM1512 (45 lb, 35.7 ft-lbs) or HM1812X3 (70 lb, 53.9 ft-lbs) are production-grade. All models from the HM1214C up include Makita's AVT® anti-vibration technology.
What is Makita's AVT® technology and why does it matter?
- AVT® (Anti-Vibration Technology) is Makita's internal counterbalance system that reduces the vibration transmitted from the demolition hammer to the operator. The internal counterbalance moves in opposition to the hammer piston, canceling out vibration before it reaches the handles. The practical result: less operator fatigue, more accurate strikes, and longer daily working time before Hand-Arm Vibration Syndrome (HAVS) exposure limits are reached. The HM1812X3 features Advanced AVT® — a synchronized three-component system for even greater vibration reduction.
What is the Makita 18V LXT platform and which tools run on it?
- 18V LXT is Makita's most widely-used cordless battery platform. At DCS we stock these 18V LXT tools: XRV02T concrete vibrator (kit), XCS04T1 rebar cutter, XRJ05Z brushless reciprocating saw, XRJ04Z reciprocating saw, XAG04Z angle grinder, XWT08T impact wrench kit, and XBU02PT1 cordless blower kit. All of these tools share the same 18V LXT batteries — so the batteries and charger from one kit work across every other tool on the platform.
What is the Makita VC4210L HEPA vacuum used for?
- The VC4210L is a 12 AMP, 11-gallon HEPA wet/dry dust extractor designed for capturing respirable concrete dust during grinding, drilling, and chipping operations. OSHA's Silica Rule (1926.1153) requires dust controls — including HEPA-filtered vacuums — for many concrete cutting and grinding operations. The VC4210L is AWS (Auto-Start Wireless System) capable, meaning it powers on automatically when an AWS-equipped Makita tool is triggered. 148 CFM and 92" water lift handles heavy concrete dust loads.
What is the Makita DS4012 mixing drill used for?
- The DS4012 is a 1/2" spade handle drill running at 0–600 RPM specifically for mixing materials — epoxy mortar, grout, thinset, drywall mud, and stucco. The low-RPM variable speed is critical for mixing because high-speed mixing entrains air bubbles, which weaken epoxy and grout joints. The 360° rotating D-handle allows you to hold the drill in any position while mixing large buckets. It's the standard mixing drill for epoxy and overlay applications.
Does the Makita GEC01PL power cutter need a compressor?
- No — the GEC01PL is fully cordless, running on two 40V max XGT batteries (included in the kit) for 80V total. It cuts masonry and metal up to 5" deep in a single pass with no gas engine, no cord, and no compressor. The kit includes two 40V 8.0Ah batteries and a dual-port rapid charger so you're ready to cut immediately.