Concrete Overlay And Repair

Mapecem Quickpatch
  • Natural gray to blend with existing concrete
  • Ease of placement, with variable water ratios
  • Mapecem Quickpatch can be applied from 1/16″ to 1-1/2″ (1.5 mm to 3.8 cm) neat and from 1-1/2″ to 3″ (3.8 to 7.5 cm) neat in areas no larger than 24 sq. ft. (2.23 m²). Larger areas will require Mapecem Quickpatch to be extended.
  • Mapecem Quickpatch can be primed and covered with a leveler, a cement-based overlay or a tile-setting mortar in as little as 90 minutes, depending on temperatures.
  • Moisture-controlling adhesives or moisture mitigation systems can be used over Mapecem Quickpatch in as little as 16 hours.
  • Floor coverings can be installed in as little as 16 hours after application as long as the existing subfloor meets the requirements of the mortars or adhesives used for installation.
ultraplan m20 plus

Ultraplan M20 Plus is a calcium aluminate-based, quick-setting, self-leveling underlayment and topping. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

planitop x

Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor. It is suited for all interior/exterior vertical and overhead concrete repairs, including precast/prestressed, tilt-up, post-tensioned and cast-in-place concrete. Planitop X can be applied from featheredge to 4″ (10 cm) per lift. Planitop X is engineered to provide high early strength with ease of application. Planitop X dries to a light gray color, matching most concrete surfaces.

 
Planiprep SC
Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.
Resurfacer

Concrete Solutions® Resurfacer is a just-add-water, polymer modified cementitious compound. It is used as a thin resurfacing and texturing material to provide a smooth, troweled, or broomed finish over concrete and other sound surfaces.

Resurfacer is used as a bond coat just before spreading Stamp-TopTM (1/4″ Stampable Overlay), as well as a base coat prior to applying Texture-TopTM, Trowel-TopTM and Spray-Top® products.

PlaniLevel 420 is a high-strength, calcium-aluminate-based, self-leveling underlayment and repair mix designed to repair or refurbish interior, concrete, engineer-approved floors before the installation of traditional floor coverings.

 

Overview: Life Deck Specialty Coatings cements are formulated for high PSI applications and blended with a variety of silica sand and proprietary additives. LD-1 is used typically for waterproofing systems & base coats. LD-2, a white cement for smooth finishes, bright or light colored staining, & texturing. LD-6, a white cement for 1/4″ stamping. LD-3 (Grey) is typically used for texturing in a standard knock-down finish. LD-5  (light grey) is generally used for grout lines, staining dark colors, decorative overlays, texturing or broom finish systems.  Other Life Deck and Americrete cements are also included on this page such as Level-Lite, Hydro-Block, micro cements and more. 

General Uses: Life Deck cements are used for a variety of applications including waterproofing systems, deck repairs, deck coatings, resurfacing failing concrete and more. Life Deck concrete is mixed with a high solids acrylic modifier such as LD-81, or 1589, unless otherwise directed.

xcel surface

What is Deep-Level Concrete Repair?

An innovative two-part, polymer modified cement patching material. Part A is our proven Xcel Acrylic Additive. Part B is Deep Level mortar base. When mixed, the two create a remarkably strong concrete repair material. This easy to use product will become your favorite patching material for filling areas up to 1” deep on any clean horizontal concrete surface.

What does Deep-Level Concrete Repair do?

Fills, repairs and levels horizontal surfaces. Our versatile formula can be used to repair low spots, spalls and even joint shoulders for professional results.

Fix problem slabs

When used as a leveling underlayment, you’ll create a surface ideal for Xcel decorative surfacing systems. Works great for tile and stone too!

Waterproof for interior or exterior use

This versatile material is great for interior and exterior concrete repairs. Although it is not intended to be used as a vapor barrier, it has excellent waterproof performance in the wettest repair locations.

What is Stamp Mix?

A stamp overlayment consisting of silica sands, proprietary additives and cement specially formulated for use on any interior/exterior concrete substrate.

What does Stamp Mix do?

When mixed with Xcel SMP 5000, Stamp Mix creates an extremely durable stamped overlay surface. Stamp Mix resists breakdown due to weathering and forms an extremely tough surface (exceeding 5000 psi compressive strength) that will not shrink, check, crack or break up.

Coverage* 

Approximately 25-35 square feet per bag at 1/4” thick

 

Planigrout 712 is a one-component, nonshrinking, nonmetallic, cement-based grout. Planigrout 712 contains a corrosion inhibitor and silica fume, as well as  a special blend of fine aggregate and plasticizers that provide exceptional placing and performance characteristics.

Topcem Premix is an accelerated-cure screed mortar suitable for bonded as well as unbonded applications. Topcem Premix can easily be screeded or sloped, and has the workability and working time of conventional screed mortars.

NS GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion
are required. NS GROUT contains only natural aggregate and an expansive cementitious binder. It is extremely
flowable. When cured, it appears similar to concrete in appearance.

Ultratop SP is a polishable, self-leveling, cementitious topping that provides a fine-aggregate exposed finish. Ultratop SP is engineered for fast-track resurfacing of horizontal wear surfaces

EUCOFLOOR SL160 is a single-component, cement based, free-flowing, self-leveling compound specially designed for easy application over concrete floors as an underlayment for subsequent placement of floor coverings. It is suitable for use as a repair and leveling course and may be applied at thicknesses from featheredge to 1” (25 mm) neat. EUCOFLOOR SL160 may be used as an indoor, light-duty (foot traffic only) wearing surface, when protected by a Euclid Chemical epoxy/urethane system.

EUCOREPAIR V100 is a single-component, quick-setting, low shrinkage repair mortar formulated with unique polymers and fiber reinforcement for trowel applied vertical and overhead repairs requiring high performance.

LEVEL TOP POLISH is an easy-to-use, self-leveling re-surfacing compound, designed for use on either new or worn concrete substrates. LEVEL TOP POLISH provides excellent adhesion, toughness, and long-term durability. LEVEL TOP POLISH can be ground and polished to achieve a high gloss finish. The high-early strength allows polishing within 24 hours of placement. In addition to flooring, LEVEL TOP POLISH can be extended with decorative aggregate for unlimited finishes. LEVEL TOP POLISH can also be used for countertops, tables, and other poured-in-place or precast applications.

LEVEL TOP PC-AGG is an easy-to-use, self-leveling re-surfacing compound with graded natural aggregate, designed for use on either new or worn concrete substrates. LEVEL TOP PC-AGG provides excellent adhesion, toughness, and long-term durability. LEVEL TOP PC-AGG can be ground and polished to achieve the appearance of polished concrete. The high-early strength allows polishing within 24 hours of placement.

EUCOWELD 2.0 is a liquid latex bonding agent for cement-based repair mortars and concrete.  EUCOWELD 2.0 has a long open time, and repair materials can be placed either after it has dried, or while it is still wet.  This bonding agent represents a new generation of easy-to-use latex, which exhibits drastically improved performance  and stability in comparison to the typical re-wettable ethylene vinyl acetate (EVA) bonding agents currently available. EUCOWELD 2.0 is a unique, non-EVA based latex that utilizes reactive chemistry for bonding, rather than depending on the moisture content of the repair material.

Sikaflex® Self Leveling Sealant is used to seal horizontal expansion joints in concrete and cementitious slabs 

  • Designed for all types of joints where maximum depth of sealant will not exceed 1/2 in.
  • Excellent for small joints and fillets, windows, door frames, reglets, flashing, common roofing detail applictions, and many construction adhesive applications.
  • Suitable for vertical and horizontal joints; readily placeable at 40°F
  • Has many applications as an elastic adhesive between materials with dissimilar coefficients of expansion.
  • Submerged conditions, such as canal and reservoir joints.